Location:Home > >
How does the particle in the drying equipment move
Date:2017-02-16 16:07:21 Hits:3135
How does the particle in the drying equipment move? If we understand how the particles in the dryer are moving, we can better understand how the drying equipment is dry.
First of all, the hot air used for drying flows from the bottom of the cylinder to the cylinder along a straight line along the cylinder wall, and rotates as the cylinder rotates. When rise to contact with the material phase, which heats the material, due to material in the chimney before encountered because of rotation of the rotary blades was crushed, so when the hot air flow across the crushed materials, in the material heating but also with animal feed rotation, thus the material is dispersed, do not stick in together, the heating area becomes larger, more likely to be dry.
Then, the heat flow will get moisture with moisture from the air outlet to row out, the new chimney repeatedly to dry materials, materials in the water will be less and less, we want to reach the water rate, stop into the hot air flow, we can get through the discharging opening after drying of finished product.
The above is the drying equipment inside the particle movement process, after this explanation, is not the operation of the drying equipment more clearly?
First of all, the hot air used for drying flows from the bottom of the cylinder to the cylinder along a straight line along the cylinder wall, and rotates as the cylinder rotates. When rise to contact with the material phase, which heats the material, due to material in the chimney before encountered because of rotation of the rotary blades was crushed, so when the hot air flow across the crushed materials, in the material heating but also with animal feed rotation, thus the material is dispersed, do not stick in together, the heating area becomes larger, more likely to be dry.
Then, the heat flow will get moisture with moisture from the air outlet to row out, the new chimney repeatedly to dry materials, materials in the water will be less and less, we want to reach the water rate, stop into the hot air flow, we can get through the discharging opening after drying of finished product.
The above is the drying equipment inside the particle movement process, after this explanation, is not the operation of the drying equipment more clearly?
